ALTUA undertakes defined building repair and rectification work across Melbourne, including damaged façades, render, concrete surfaces and exterior finishes. We assess visible defects, identify the practical repair scope and coordinate the work around the building's condition and access requirements.
Different defects call for different repairs. A cracked coating, detached render and spalled concrete can look similar from a distance but require different preparation and corrective methods. The scope should reflect the underlying material and the condition observed on site.
Localised concrete spalling, damaged edges and deteriorated exterior finishes require assessment of the affected material before repair. Preparation, reinforcement and finishing depend on the defect and the approved scope.
Cracked, loose or hollow-sounding render needs more than a cosmetic skim coat. The substrate, moisture exposure and extent of unsound material influence preparation and the appropriate repair method.
Damaged façade trims, junction finishes and selected timber elements may be repaired or replaced as part of a coordinated external make-good package, with adjacent finishes matched where practical.
Water ingress, movement, corrosion and poor adhesion can each contribute to visible façade damage. Covering the symptom without investigating its likely cause may lead to recurring deterioration.
Assessment starts with the location, pattern and extent of damage, plus any available history. Where defects suggest structural movement, unsafe loose material or other specialist concerns, the next step may be an engineer or appropriately qualified specialist rather than an immediate cosmetic repair.
Review the visible defect, surrounding substrate, likely contributing conditions and safe access. Record uncertainties requiring further investigation.
Specify removal and preparation, compatible repair materials, reinstatement and finishing, with clear inclusions and exclusions.
Complete the agreed works, observe relevant product application and curing requirements, and review the finished repair against the defined scope.
High-level façade repairs may need scaffolding, elevated access or an alternative work method appropriate to the site. Work near entrances, footpaths, gardens and occupied areas also needs a practical plan for protecting building users and surrounding finishes.
Where access equipment or permits are needed, these should be considered in the quotation rather than treated as an incidental detail.
Commercial Property MaintenanceA local patch may not resolve widespread substrate failure, recurring water penetration or significant structural defects. Those conditions can require broader investigation, redesign or replacement of affected components. ALTUA's quotation should distinguish the proposed repair from any specialist design, certification or work outside its agreed scope.
Cladding Replacement & Rectification Interior linings: Plastering & PlasterboardBrowse published external building projects and their recorded scopes. Not every project in the portfolio is a rectification project.
A repair restores a damaged element or finish. Rectification addresses a defect or an installation issue against an agreed corrective scope. The cause should be understood before deciding whether a surface repair alone is sufficient.
Painting may conceal a crack temporarily without addressing movement, moisture or loose render underneath. The condition and cause should be assessed first; the repair may require removal of unsound material, crack treatment and compatible finishing before repainting.
Loose concrete can pose a falling-material risk. The location, extent of delamination, moisture exposure and any visible reinforcement corrosion matter. Where structural integrity or public safety may be affected, an appropriately qualified professional should assess the condition before repair.
Colour and texture matching can be planned using samples and the existing finish as a reference. Ageing, weather exposure and different material batches can affect the result, so a repair is not always completely invisible.
Not automatically. A quotation based on visible defects should identify assumptions and exclusions. If opening up the area reveals additional deterioration, the extent and cost of further work should be agreed before proceeding.
Related items can often be grouped by elevation or access zone. The sequence should consider safe access, drying or curing requirements, compatible finishes and whether one activity could damage completed work.
Some works may require engineering assessment, permits, specialist trades or approval from a building owner or owners corporation. The requirements depend on the building, location and nature of the defect; they should not be assumed to be included in a general repair quotation.
Send wide and close-up photos, the site address, approximate dimensions and heights, access limitations, any history of water ingress, and relevant drawings or previous inspection reports. This helps distinguish an identifiable repair from an issue requiring further investigation.
